詳細介紹：
美孚拉瑪524防銹油(Mobilarma 524)
美孚拉瑪524防銹油(Mobilarma 524) Mobilarma 500 Series oils are premium performance products primarily intended as run-in or lay-up lubricants, which provide effective rust preventive films on the internal surfaces of machinery. They are particularly suitable as run-in lubricants for diesel and gasoline engines. The oils displace water from metal surfaces and form strong water-resistant films on the metal surfaces to prevent rust and corrosion. The Mobilarma Series oils absorb the water in systems into a water-in-oil emulsion so that the contact surfaces of the machinery still get satisfactory lubrication. Their high level of chemical stability and their anti-wear and detergent properties make them suitable as high quality short-term lubricants.
美孚拉瑪524防銹油(Mobilarma 524) In most applications, the residual rust preventive films need not be flushed away when the assembly is filled with lubricating oil or hydraulic fluid and put back in service. However, flushing with a charge of lubricating oil to remove the Mobilarma product or its residual film, is recommended if:
1. The Mobilarma does not provide the required lubricant characteristics to operate the equipment at rated loads and temperatures
2. Draining of the equipment is difficult and considerable pockets of the Mobilarma cannot be easily removed
3. Contamination of the system oil by the Mobilarma could reduce the lubrication performance characteristics (examples; Mobilarma could increase Freon cloud points in compressors or water-in-oil emulsions reduce anti-wear characteristics in high pressure hydraulic systems)
4. Presence of the rust preventive agents reduces the ability of the new oil to separate water in turbine and similar equipment.
Features and Benefits
The Mobilarma 500 Series oils provide an excellent lubricant that also acts as a rust preventive. This allows safe lay-up of equipment that will not be used immediately but may be operated intermittently at low to moderate loads for short periods of time. These products provide excellent rust preventive performance reducing any potential damage that could otherwise occur in non-operating equipment. This saves clean-up and potential rigorous flushing procedures prior to placing the equipment back in service.
Features Advantages and Potential Benefits
Excellent Rust and Corrosion Protection High level protection against rust during seasonal lay-ups
Reduced clean-up time required to place equipment back into production
Displaces water from metal surfaces and form tenacious protective films
Effective Anti-Wear Properties Protects equipment against wear
Dual Purpose Lubricant/Rust-Preventive Nature Reduced costs and time for run-in, testing or adjustment procedures
Eliminates unnecessary flushing and draining steps
Applications
Run-in oil and lay-up oil for engines and industrial equipment
Turbines that will be out of service for long periods
Hydraulic systems where water is present and the formation of emulsions will not effect operation
Test calibration oil
--Typical Properties
Mobilarma 500 Series 522 524 525
Viscosity, ASTM D 445
cSt @ 40o C 28.8 88.4 53.5
cSt @ 100o C 5.0 10.5 8.7
Viscosity Index, ASTM D 2270 95 95 100
Pour Point, oC, ASTM D 97, max -24 -18 -36
Flash Point, oC, ASTM D 92, min 182 218 198
Density @ 15.6o C, Calculated, lbs/gal 7.3 7.36 7.33
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
防銹潤滑劑
產品描述
Mobilarma 500系列油優質性能產品主要作為試車或停止?jié)櫥瑒?、提供有效的防銹薄膜內部表面的機械。它們特別適合作為柴油和汽油發動機的試車潤滑劑。金屬表面的油脂取代水和形成強大的防水薄膜在金屬表面防止生銹和腐蝕。Mobilarma系列油吸收的水系統為油包水乳液,這樣接觸表面的機械仍然得到滿意的潤滑。高度的化學穩定性和抗磨和洗滌劑屬性使他們適合的高質量短期的潤滑劑。
在大多數應用程序中,剩余防銹劑的電影不需要刷新當大會充滿潤滑油或液壓油和放回服務。然而,沖洗用的潤滑油移除Mobilarma產品或其殘余電影,建議如果:
1。Mobilarma沒有提供所需的潤滑劑特征操作設備在額定負載和溫度
2。排水設備是困難的和相當大的口袋的Mobilarma不能被輕易移除
3所示。污染Mobilarma可以減少潤滑系統油的性能特征(例子;Mobilarma可以增加氟利昂云點壓縮機或油包水乳劑減少抗磨特性在高壓液壓系統)
4所示。防銹劑的代理人的能力降低渦輪的新油分離水和類似的設備。
特性和好處
Mobilarma 500系列油提供了很好的潤滑劑,也作為防銹劑。這允許安全停止的設備將不會立即使用,但是這可能是間歇式操作在低到中度持續很短的時間。這些產品提供優異的防銹性能減少任何潛在的傷害,否則可能發生在非經營性設備。這節省了清理和潛在的嚴格的沖洗程序之前將設備恢復服務。
--功能優勢和潛在的好處
--的防銹、防腐高水平在季節性上籃防止生銹
--減少清理時間將設備重新恢復生產
--取代水從金屬表面,形成頑強的保護膜
--有效的抗磨損性能保護設備免受磨損
--雙重目的潤滑劑/防銹劑自然減少成本和時間試車,測試或調整程序
--消除不必要的沖洗和排水措施
應用程序
插入部分石油和停止石油引擎和工業設備
渦輪機將長時間的服務
液壓系統存在水和乳狀液的形成不會影響操作
測試校準石油
典型的屬性
Mobilarma 500系列522 524 525
粘度、ASTM D 445
中科@ 40oc 28.8 88.4 53.5
中科@ 100oc 5.0 10.5 8.7
粘度指數、ASTM D 2270 95 95 100
傾點,oC,ASTM D 97,馬克斯24 18 36
閃點,oC,ASTM D 92分鐘182 218 198
密度@ 15.6oC,計算,磅/加侖7.3 7.36 7.33
健康和安全
根據可用的信息,這個產品預計不會對健康產生負面影響,當用于目標應用程序和建議提供的材料安全數據表(MSDS)之后?；瘜W(xué)物質可通過你的銷售合同要求辦公室,或通過互聯網。此產品不應該用于其預期用途以外的用途。如果使用處理產品,注意保護環境。
包裝：18L,208L
粵公網安備 44030602003087號